|
Further details
MXM is generally used to burnish the piston pin , shaft, shock absorber mil, pump mil, motor mils etc. In addition it is also ideal to burnish rapidly the workpiece and the surfaces of the parts in shape of cylindrical bar that are impossible to take under process between two points. It is possible to process any kind of material by using
MXM. It is capable to process all workpieces with the tolerance up to IT8 at sole adjustment. All metals featuring the hardness up to max. 42 - 45 HRC can be burnished. Super finish surfaces up to Ra=0,02
µm can be obtained.
MXM Model Burnishing Machines enables the part going forward and tolerance adjustment automatically. The workpiece is taken then removed after burnishing process completed i.e it features full automatic specification. It is capable to achieve a rapid production thanks to the automatic feeding system. It can be integrated to any production line fault for every kind of serial production.
Type MXM-1 NC
Design and function
MXM Roller Burnishing Machines
are capable to process any kind of diameter between Ø3-Ø40 mm by changing the roller heads. The relevant roller head is used for each nominal diameter. The head is selected to install in machine depending on the process type. Each head features the adjustment capacity of 0,5 mm. The burnishing head can be adjusted in nominal diameter with the tolerance between -0,40 and +0,10
Advantages
-The roller heads are replaced easily and rapidly.
-A precious and fast adjustment can be done thanks to the developed adjustment mechanism.
-It is capable to achieve a rapid production automatically.
-The weight and dimensions of the machines are low so it can be carried away to anywhere thanks to such portable specification by covering less space.
-No sawdust and dust wastes
-Requires a few lubrication
|
